About Us |  Contact Us |  F.A.Q.s |  Installation
website security

Labels & Decals

Authentic Reproductions of the Original Labels and Decals for Ferrari Cars!

close [x]

Labels & Decals « Ferrari « Home   

Questions? Call (805) 921-0100 or (800) 222-9577, Monday - Friday, 8 am to 5 pm PST. Click to e-mail us anytime!

Select Car to Show Available Products:

Seat Kits Carpet Sets Floor Mats Raw Materials
Labels & Decals Rubber Seals Tops & Boots Headliners



Daytona Ignition Label

Product # 308-DFOL: Daytona Firing Order Label
Product # 308-DEFCLS: Daytona Euro Fuse Cover Label Set

Return to Top

Ferrari 330 Models

330 Decal

Label is screen printed in black ink on shinny aluminum foil stock.
Used on all Ferrari 330 models. 100 point concourse quality.

Product # 308-330PL: 330 Paint Label

Return to Top

Expansion Tank Label (All Ferraris)

Expansion Tank Label

These labels, used on the expansion tank inside the engine compartment, are usually missing or in very poor shape due to the extreme temperature swings. It's a good idea to have a few on hand. The label needs to be replaced about every other year and when the expansion tank is restored to it's original condition.

Product # 308-ET01: Used on all Ferrari models prior to 1984.
Black on shiny aluminum foil.

Product # 308-ET02: Used on all Ferrari models on and after 1984.
Black on matte aluminum foil.

Return to Top

High Voltage Label (All Ferraris)

High Voltage Label

On 308 models the label is located on the left side of the engine bay's top shelf above the large white vehicle emission control label. It's in an area where tools and other items are placed when working on the engine, usually causing damage to both labels. On the Testarosa, it's placed on a thin piece of aluminum directly above the exhaust system. After about a year the label will turn gray because of the extreme heat. In many cases it will dry out and simply disappear. It's always a good idea to have a few of these on hand so you can be ready for that next concours event!

Product # 308-HV01: Used on all Ferrari models prior to 1984.
Black on shiny aluminum foil.

Product # 308-HV02: Used on all Ferrari models on and after 1984.
Black on matte aluminum foil.

Return to Top

Coil Label Set (2 pcs)

Coil Label Set

Label is screen printed in black ink on shinny aluminum foil stock.
Used on most Ferrari models from 1962 through 1986.

Product # 308-COIL: Located on or near the coil set in the engine compartment

Return to Top

High Voltage Plate (Dino Models)

High Voltage Plate

Black ink on light aluminum plate stock.
Used on all Ferrari Dino 246 and 206 models from 1972 through 1974.

Product # 308-DHV

Return to Top

Periodical Maintenance Label (Daytona & 246 Dino GT)

Periodical Maintenance Label

Labels are as original, produced on a heavy aluminum foil stock.
Labels are 100 point concourse quality!

Two (2) versions were produced:
DINO 246 GT: (displayed above) used on all 246 models
- EVENT -: (not illustrated) used on all Daytona models

Return to Top

Fan, Hazard, Wiper Speed and Aerial Switch Plate Set

#308-FHWA1 Plate Set

#308-FHWA1 Plate Set

#308-FHWA2 Plate Set

#308-FHWA2 Plate Set

These plates are positioned on the console of all Ferrari models from 1976 through 1985. They are fitted under the switches, housed in the console. Note the difference between the early type version 1 and the later version 2. The early plate had no markings to the right of the fan switch to indicate switch speed. We believe the plate was converted to the later version 2 sometime during 1979. Each set is sold complete and includes both plates.

Version 1 Switch Plate Set: # 308-FHWA1
Version 2 Switch Plate Set: # 308-FHWA2

Return to Top

Full Rated Load Label (Ferrari 308 Models)

308 GTS: #308-LRGTS


308 GTSi: #308-LRGTSi


308 GTB: #308-LRGTB
(no illustration)

308 GTBi: #308-LRGTBi
(no illustration)

We found these labels placed in a variety of locations. In most cases on or near the drivers door. Check your owners manual to determine where to look for yours. Used on all 308 models from 1976 through 1984. A large label, measures 2.25" W x 5.25" L. Printed in black ink on a white background. Above are pictures of the 308 GTS and 308 GTSi version. The 308 GTB and 308 GTBi are also available.

Return to Top

www.worlduph.com is a registered trademark.
Any copying or reproduction of any kind must be approved by a written contract.
This website is maintained by World Upholstery & Trim Webmaster


Over the years, different terminologies have been used for the same parts. To minimize confusion we've collected many of the diffeent names to give customers some reference to the different Alfa Romeo, Mercedes-Benz, BMW, Porsche, Ferrari, Fiat and Jaguar trim parts that vary in terminology around the world.

Convertible top = soft top, rag top, head, hood, hooding, soft window Targa top, retractable top, vinyl top, top boot, convertibles arriba, converteerbare boven
Carpet = rug, rugs, carpet kit, carpet set, molded carpet, cut and bound carpet.
Seating = seat kit, upholstery kit, leather upholstery, sport seat, recaro seat, vinyl seat, cloth seat, sitzkissen, perforated, perforiert, embossed, sitzpolsterung, imbottitura sedile, asiento tapizado
Sealing = rubber seals, weatherstrips, weatherseals, door seals, window seals, gaskets, dichtungsrahmen
Panels = door panels, linings, trimmings, coverings, sun visor, sunvisor, sonnenblenden, headliner, himmel bespannung, encabezando
Trunk = boot


Leather = hide, side, skin, cowhide, leder, cuero, Connolly, Roser, Bridge of Weir, cuoio, split
Carpet = Abetone, Dorsett, FTV, feintuft, loop, cut pile, Wilton, perlon, tufted, automatico de alfombras, teppich, tapijt, tapis
Vinyl = Spradling, China General, Freudenberg, MB Tex, ambla, leathercloth, rexine, hardura, ICI, vinyle, naugahyde
Topping = Happich, Stafast, STF, Aresma, Sonnendeck, Sunfast, dobby, lienzo, leinwand
Seat Pad =  rubber fiber pad, foam pad, gummihaarauflage, almohadilla
Sunvisor = sonnenblend, pare soleil, domenica visiera, zonneklep